Official TAC DINE manufacturer | Fiberdine Co., Ltd.
For Tougher and more Advance Construction
Epoxy-resin systems for concrete protection, repair and reinforcement.
WHAT IS TAC DINE?
A two-component epoxy-resin series for foundation reinforcement, repair and protection
Fiberdine Co., Ltd. is the manufacturer of TAC DINE, a Japan-made series of epoxy-resin materials for concrete repair, reinforcement and protection. TAC DINE is sold through authorized dealers with a thorough understanding of its product characteristics and application procedures, supported by specialist knowledge and technical expertise.
The TAC DINE hybrid method combines TAC DINE resin with reinforcement fibers for the repair and reinforcement of concrete structures, including residential foundations.
Product applications, basic specifications, performance data and published documents are available on each product page.
CONCRETE REINFORCEMENT
TAC DINE resin and reinforcement fibers for concrete reinforcement
For residential foundations and other concrete structures, TAC DINE resin can be combined with reinforcement fibers according to the substrate and application conditions. Product specifications, application steps and published technical documents are available within this site.
Reinforcement fibers
Japan-made aramid, aramid processed in China, carbon, glass and basalt reinforcement fibers.
View reinforcement fibers →APPLICATIONApplication procedure
Review the sequence from substrate inspection and repair through resin application, fiber placement, deaeration, pressing and finishing.
View application procedure →TECHNICAL DATATechnical documents
Review product specifications, Safety Data Sheets, application documents and published test or technical reports.
View technical documents →Bringing patented technology to the next jobsite.
IN DEVELOPMENT
TAC DINE SYSTEM
New Cordless Crack Injection System in Development
Fiberdine is developing a new cordless crack injection system based on patented technology.
Development details
The system is being developed and evaluated for crack-injection work, with a compact hand-held-tool format and an 18 V cordless power source.
Detailed specifications, mechanisms and compatible materials have not yet been released.
The product is planned as part of the TAC DINE SYSTEM, combining TAC DINE materials with dedicated application equipment.
To maintain application quality and appropriate product use, supply is planned to be limited to authorized dealers that meet Fiberdine’s handling requirements.
This product is under development. Specifications, appearance and sales arrangements may change.
PRODUCTS
TAC DINE Product Lineup
Products for concrete repair, reinforcement, protection and injection.
AC-100Ⅱ
Chemical-resistant reinforcing agent for concrete
View product details ↗
PE-10GⅡ
Solvent-free concrete protection material for protection, repair and reinforcement
View product details ↗
CP-10
Low-viscosity, solvent-free adhesive that penetrates hairline cracks up to 0.5 mm
View product details ↗
BG-200(G)
Putty-type repair material for concrete defects and steel-plate bonding work
View product details ↗
PS-10(G)
Solvent-based concrete protection material with abrasion resistance
View product details ↗
AL-100
Wood repair and reinforcement material containing chopped aramid fibers
View product details ↗
AD-20
Bonding agent for new concrete or mortar applied to existing concrete
View product details ↗
TD-Cartridge
2:1 cartridge-type crack injection material suitable for damp surfaces
View product details ↗
M-1 Rapid-Curing Joint Sealant
Rapid-curing joint sealant for short-duration work
View product details ↗
NK Glass Primer
Penetrating water-glass treatment for carbonated concrete
View product details ↗
Solvent-Free CP-10 for Hairline-Crack Repair
For hairline cracks generally up to 0.5 mm, low-viscosity solvent-free CP-10 can be considered. It reduces concerns associated with solvent-derived odor and volatile components and does not require special pressure-injection equipment. PS-10(G) production is currently suspended, but CP-10 does not replace every PS-10(G) application.
REINFORCEMENT FIBERS
Reinforcement fibers used with TAC DINE
Five reinforcement-fiber options for foundation reinforcement, concrete reinforcement and hybrid-method applications, selected according to the substrate and required performance.
Japan-Made Aramid Sheet
FiBRA Sheet AK40 / Japan-made standard
View product details →
Aramid Sheet Processed in China
DuPont™ KEVLAR® #49 / processed in China
View product details →
Carbon Fiber Sheet
High strength / high modulus
View product details →
*Illustrative image.Glass Fiber Sheet
General purpose
View product details →
Basalt Fiber Sheet
Inorganic fiber
View product details →JAPANESE MANUFACTURING
TAC DINE. Made in Japan.
The TAC DINE series is manufactured in Japan by Fiberdine Co., Ltd.
*Illustrative image.
INFORMATION
Frequently Asked Questions
What is TAC DINE?
A series of two-component epoxy-resin products manufactured in Japan by Fiberdine for concrete protection, repair and reinforcement.
What is the TAC DINE hybrid method?
It combines TAC DINE resin with reinforcement fibers to repair and reinforce concrete structures, including residential foundations. See Products for the materials and the TAC DINE application procedure for the work sequence.
Does crack width change the repair method?
Yes. Required resin characteristics and repair approaches can differ by crack width and condition. Fiberdine’s technical paper uses a practical three-type classification: 5 mm or more, around 1 mm to several mm, and 0.5 mm or less. Actual selection should also consider possible resin loss and substrate condition. See Crack Repair Principles.
Where can I find product documents?
See Technical Documents for documents organized by product.
Which reinforcement fibers are available?
Japan-made aramid, aramid processed in China, carbon, glass and basalt sheets.
CONTACT