Japan-made sheet
Standard product made in Japan.
- Category
- Japan-made standard
- Widths
- 100 / 250 / 300 mm
- Construction
- Unidirectional sheet
REINFORCEMENT FIBER
Aramid Sheet Processed in China
High-strength special specification processed in China using original DuPont™ KEVLAR® #49 aramid yarn from the United States.
Basic information
- Dimensions
- 100 mm × 50 m / 250 mm × 50 m
- Areal weight
- 280 g/m²
- Tensile strength
- 2.1 kN/mm²
- Young’s modulus
- 118 kN/mm²
The tensile strength and Young’s modulus are common reference values for the aramid sheets; they are not individual values for the Japan-made standard and the high-strength specification processed in China.
Documents
Documents are provided as original Japanese-language PDFs. Each card includes a concise English summary for orientation.
Aramid sheet application instructions
↗Illustrated Japanese application guide for reinforcing repaired concrete with TAC DINE resin and aramid sheet, including crack preparation, primer/putty work and sheet application steps.
Aramid sheet strength test
↗Japanese test report describing loading tests on concrete specimens reinforced with aramid sheet and TAC DINE resin under the stated test setup, with observations on reinforcement and adhesion.
TAC DINE resins used with this fiber
PE-10GⅡ or AC-100Ⅱ is used to bond Aramid Sheet Processed in China in the TAC DINE fiber-reinforcement method. Refer to the application documents for details.
PRODUCT INFORMATION
Japan-made standard and high-strength specification processed in China
High-strength specification processed in China
Original DuPont™ KEVLAR® #49 aramid yarn from the United States, processed in China.
- Yarn
- DuPont™ KEVLAR® #49
- Processing
- China
- Widths
- 100 / 250 mm
- Construction
- Unidirectional sheet