TAC DINE M-1 Rapid-Curing Joint Sealant
Rapid-Curing Joint Sealant
A rapid-curing joint sealant mixed at a 1:1 ratio. Initial cure is approximately 5 minutes at 20°C.
01
Basic specifications
- Product category
- Rapid-curing joint sealant
- Mixing ratio
- Base: hardener = 1:1
- Pot life
- 5 minutes (20°C)
- Initial cure guide
- Approximately 5 minutes (20°C)
- Bond strength
- 100 kgf/cm² or more
02
Applications
01
Joint sealing
For sealing joints before crack injection.
02
Bonding defects
May be used to bond defects in areas not exposed to water.
03
Short-duration work
Apply or fill within the pot life for rapid initial cure.
03
Performance data
Pot life5 minutes20°C
Initial cureApprox. 5 minutes20°C
Bond strength100 kgf/cm² or moreValue stated in document
04
Selection and application
Selection
For joint sealing before crack injection and bonding defects in dry locations where rapid initial cure is needed.
Application
Take equal amounts of base and hardener, mix rapidly until uniform in color, and apply within the 5-minute pot life. Do not use where water resistance is required.
05
Documents
Documents are provided as original Japanese-language PDFs. Each card includes a concise English summary for orientation.